Description
Description: 1500VA 1350W UPS SMART LCD RM AVR 120V
Tripp Lite UPS Smart 1500VA 1350W Rackmount AVR 120V Preinstalled WEBCARDLX Pure Sine Wave USB DB9 Extended Run 2URM – UPS – AC 120 V – 1.35 kW – 1500 VA – Ethernet, RS-232, USB – output connectors: 8 – 2U – 19″
The SMART1500RMXLN SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up servers and network storage devices, the SMART1500RMXLN switches to battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss.
Key Selling Points
Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
Audible alarm signals loss of utility power, overload, low battery and fault conditions
10 ft. power cord with 120V NEMA 5-15P input
0.9 power factor rating
570-joule surge suppression rating
Reliable Battery Backup with Expandable Runtime
Supports half load up to 14 min. and full load up to 4.9 min.
Internal batteries designed for hot-swap field replacement
95% line-power efficiency rating saves money in energy costs
Expandable runtime with optional external battery packs, such as Tripp Lite’s BP36V15-2U
Pre-Installed WEBCARDLX Network Interface
Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH
Optional EnviroSense2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status
8 NEMA 5-15R Outlets in 2 Load Banks
4 outlets are switchable to remotely reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
Maintains 120V nominal output over input range of 83V–145V without using battery power
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance
Interactive LCD Screen
Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
Rotates for easy viewing in rack-mount or tower configurations
Communications Ports
USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite’s PowerAlert software (available via free download from www.tripplite.com/poweralert)
EPO port supports emergency shutdown in large facilities
Versatile Installation Options
Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
Mounts in upright tower position with optional 2-9USTAND accessory