Description
Description: 2200VA 1920W UPS SMART LION LIFEPO4 LCD
Tripp Lite SmartPro 2200VA 1920W UPS Smart Lithium Ion LiFePO4 LCD USB DB9 120V 2URM – UPS (rack-mountable) – AC 120 V – 1.92 kW – 2200 VA – 1-phase lithium – RS-232, USB – output connectors: 8 – 2U – 19″
The SMART2200RM2UL SmartPro 120V 2.2kVA 1.92kW Line-Interactive Sine Wave UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up servers and network storage devices, the SMART2200RM2UL switches to 2.2kVA/1.92kW battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss.
The innovative lithium iron phosphate (LiFePO4) internal battery more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100-percent capacity in less than two hours, making the SMART2200RM2UL an ideal backup in case of power outage. It provides 11.7 minutes of support at half load and 5.1 minutes at full load.
Featuring eight NEMA 5-15R outlets (two switchable) and a 10-foot power cord with NEMA 5-20P input, the SMART2200RM2UL maintains 120V nominal output over an input range of 83V to 147V without using battery power. EMI/RFI noise filtering improves your equipment’s performance and prevents damage. A 570-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite’s PowerAlert software (available via free download), the SMART2200RM2UL enables safe unattended system shutdown and file saves in case of a prolonged power failure.
Key Selling Points
Provides fully regulated sine wave AC output for servers, network storage devices, telecom hardware and other applications where long battery lifespan is critical
Audible alarm signals loss of utility power, overload and low battery
8 NEMA 5-15R outlets
10 ft. power cord with 120V NEMA 5-20P input
570-joule surge suppression rating
0.9 power factor rating
97% line-mode efficiency rating saves money in energy costs
More than 2x the service life
Up to 3x more charge/discharge cycles
Recharges to 100% capacity in less than 2 hr.
Weighs 60% less, reducing overall UPS weight
Designed for hot-swap field replacement
Supports half load up to 11.7 min. and full load up to 5.1 min.
Can control 2 outlets remotely to reboot equipment or shed nonessential loads
Maintains 120V nominal output over input range of 83V–145V without using battery power
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance
Front-panel LCD with detailed UPS and site power status and operating data
Rotates for easy viewing in rack-mount or tower configurations
Compatible with Tripp Lite UPS management cards TLNETCARD, WEBCARDLX, SNMPWEBCARD and RELAYIOCARD
USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite PowerAlert software (available via free download at www.tripplite.com/poweralert)
EPO port supports emergency shutdown in large facilities
Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
Mounts in upright tower position with optional 2-9USTAND accessory
$250,000 Ultimate Lifetime Insurance covers any connected components (U.S., Canada and Puerto Rico only)