Description
Description: 10M USB3 CBL SUPERSPEED ACTIVE EXTN
Tripp Lite 10M USB 3.0 SuperSpeed Active Extension Repeater Cable M/F 33ft 33′ 10 Meter – USB extension cable – USB Type A (F) to USB Type A (M) – USB 3.0 – 33 ft – active – gray
Tripp Lite’s 10 m (33-ft.) USB 3.0 active extension cable is a bus powered extension cable that can be used to increase the length of a device cable without the worry of signal loss and potential performance problems. Increase the extension distance to 20 m (66-ft.) by connecting two U330-10M together. USB limits a cable’s length to 5 m (16-ft.) Any length above 5 m (16-ft.) requires the use of an active cable such as this one. This cable has a signal booster built in. The cable must be plugged directly into a USB port (either on the PC or a hub). Use a standard 1.83 m (6-ft.), 3.05 m (10-ft.), or 4.57 m (15-ft.) USB 3.0 A-B cable to reach the desired distance. The U330-10M provides up to 120mA of power to the connected device. If your device requires more than 120mA of power, an external power supply will be required. The U330-10M accepts a 5V, 2A power supply with a 3.5 x 1.35mm DC jack. The output plug on the power supply should have a positive tip and a negative sleeve.
Whats in the Box
- 10 meter ( 33-ft ) USB3.0 Super Speed A/A Active Extension Cable (USB-A M/F)
Key Selling Points
Extend a USB 3.0 signal 33 ft. (10 m.)
Increase the extension distance to 66 ft. (20 m.) by connecting two U330-10M together
Works together with standard USB 3.0 cables
Provides up to 120mA of power to the connected device. If your device requires more than 120mA of power, an external power supply will be required.
Accepts a 5V, 2A power supply with a 3.5 x 1.35mm DC jack. The output plug on the power supply should have a positive tip and a negative sleeve.
Backward compatible to previous USB generations
A USB 3.0 Computer port and USB 3.0 device are required to meet USB 3.0 speeds. A USB 2.0 port or device can be used, but you will be limited to the speeds of that port / device.
The U330-10M provides up to 120mA of power to the connected device. If your device requires more than 120mA of power, an external power supply will be required. The U330-10M accepts a 5V, 2A power supply with a 3.5 x 1.35mm DC jack. The output plug on the power supply should have a positive tip and a negative sleeve.