Description
Description: HDMI OVER CAT6 ACT REM RECEIV POC 4K TAA
Tripp Lite HDMI over Cat6 Active Remote Receiver with PoC and Multi-Resolution Support – 4K @ 60 Hz, 4:4:4, HDR, TAA – Video/audio extender – receiver – HDMI – over CAT 6 – 1 ports – up to 125 ft – TAA Compliant
This box-style active remote receiver works in tandem with Tripp Lite’s B127P-002-H or B127P-004-H transmitter to extend 4K video (at 60 Hz) and stereo audio from an HDMI source to an HDMI display up to 38.1 meters using Cat6 cabling. It can also extend a 4K HDMI signal (at 30 Hz) up to 45.7 meters and a 1080p HDMI signal (at 60 Hz) up to 61 meters.
The B127P-100-H is recommended for conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.
The B127P-100-H supports Ultra HD video resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. This receiver is compatible with HDMI 2.0 standards for carrying HDR signals, which provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks. It supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. HDCP 2.2 compliance allows you to stream iTunes and Netflix content with no complications.
Say you have a brand new 4K (at 60 Hz) HDTV in the living room, but want to also connect your Blu-ray player or satellite box to the older 1080p TV in the bedroom. The B127P-100-H works with a Tripp Lite B127P-002-H or B127P-004-H splitter/transmitter to allow up to four televisions to display video at their maximum resolution. Most other video applications default each television to the lowest common resolution, meaning you would only get a 1080p image on that new 4K TV.
Built-in Power over Cable (PoC) technology powers the low-profile receiver over Cat6 cable. Green and orange LEDs will light up to indicate the unit is receiving power and a signal is being received. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver away from an AC outlet.
The receiver works right out of the box with no software or external power supply required. Mounting hardware is included for installing it on a wall, pole or 19-inch rack. Connect the receiver to the display with a user-supplied high-speed HDMI cable (such as Tripp Lite’s P568- or P569-Series) and to the transmitter with Cat6 patch cable (such as Tripp Lite N202-Series cable).
Key Selling Points
Requires Tripp Lite B127P-002-H or B127P-004-H transmitter to extend HDMI signals
Supports UHD resolutions up to 3840 x 2160 (@ 60 Hz) for crystal-clear 4K x 2K video
Power over Cable (PoC) technology provides power to the receiver via Cat6 cable
Supports 4:4:4 chroma subsampling for HDR displays, meeting latest color standards
Supports multi-resolution output to allow for combination of different display types
This product is covered by a 1-year limited warranty